Delimiter for Shimano E8000 E7000 E6000 E5000

IMPORTANT:

All of our tuner are production tested with the firmware of the motor at the time, we are not responsible for its malfunction in the face of any ebike update after the purchase of the delimiter.

By installing this delimiter, walk mode is disabled.

Speed delimiter for Shimano motors from the E series. Valid for engines:

• E8000
• E7000
• E6000
• E5000

Valid for all types of bicycles, regardless of the wheel size, screen type or battery installed. Installation very simple, without the need to cut cables or make empaints.It is only necessary to disconnect the engine speed sensor connector and connect the dislimiter.The bicycle has no maximum speed limit. It includes a manual with photos and instructions that solves any doubt that may arise in the assembly. Reversible installation, with only re-connecting the speed sensor, the bicycle returns to its initial state.It does not leave remains of use in the system, so its use is indetectable and does not damage the bicycle guarantee. The limitator does not modify the mode of use of the engine, nor increases its power, only the maximum speed achieved.It does not damage the engine and the battery. The speed shown on the screen will not match the real speed of the bicycle. * Before using this product, consult the current legislation in your country, referring to the speed limits allowed when roaming on public roads, since the tuner changes the maximum speed that the bicycle can reach.